A garage door window Parker can be attractive to any garage, as it provides natural light, which makes it a good place to have a nice time, as compared to a garage with artificial light. The good news is most garage doors give you the choice of windows to improve the look and feel of your home. They are not difficult to install, and with some easy tools and basic understanding of their workings you can install a window for your garage door.
Nevertheless, garage door window Parker come in different colors, shapes and designs, from plain rectangles to complex curved. For this reason, you should pick windows that work perfectly with the general style and design of your home.
Step 1 – Get the Area Ready
Before you start working on glass materials, apply the essential protective tools such as safety goggles and hand goggles. Get all your tools and materials ready for the work and make sure the surrounding of your garage is free up to avoid obstructions. If there's anything inside the garage like furniture, move it outside for some time to prevent accidents. Once you have clear the garage from obstructions, release the door and allow it settle to the ground. Disconnect the automatic opener to prevent the door from opening accidentally.
Step 2 - Take Measurements for the Garage Door Window
You need to take measurements of a garage door window Parker so that it will fit in your door. Look carefully to be sure that the measurement is correct size, make sure it fits inside one panel on your garage door, which is why it has to be in a small size than the panel under reflection. They are normally small so that they keep up the procedure of the garage door opening and closing. Select where on the garage door you would like to put your new window. After selecting a location for your new window, take measurements of the panel in which you want to put your new window.
Step 3 - Mark the Spot for the Window
After taking measurements of your garage door panels, then you mark the opening of the window on the panel. If your garage door is built, then the back of the window you install will go across the door, while the front of the window is fixed to the door of the garage. Therefore, you will need to take a chance in the panel of the garage door hefty enough for the back of the window. Measure the back of the window and make use of a pencil to mark a rectangle. After marking the rectangle, make use of masking tape to the rectangle to guide you when cutting the panel
Step 4 - Use Jigsaw to Cut Openings
Makin uses the Jigsaw, cut an opening for each window you like to put. Follow the inner side of the masking tape to cut the hole to small size as the window. Ensure your measurements is correct because if you cut a hole bigger than the window, then all the hole will go to waste
Step 5 - Caulk and Attach Front Window
Your new window is not protected from the weather, you will need to put some shield which can be attained using caulk, without making use of this caulk, the factors will be suitable to enter the garage across the window. All you have to do is line waterproof caulk around the edges of the window before putting it into the door. Line each part of the window with caulk, and then apply the window in place. Any debris caulk must be cleaned by making use of a rag
Step 6 - Attach the Back of the Window
The way you attach the front and back sides of your window will differ massively, this depends on your manufacturer or the kind of windows you have chosen. In some situation, the window comes with screws, which can be used to screw the back and front sides together. If the window doesn't come with screws, just follow the guides your manufacturer provided for protecting both sides of the window together. If you can follow this instruction perfectly, you will have a garage door window Parker that will be in good conditions for years
Comments